next

Join IOST Network

The documentation introduces how to setup a running server connecting to IOST network, if you just want to setup a local single-server blockchain net for debugging/testing, you may better refer to Launch Local Server

We are using Docker to deploy an IOST node.

Machine requirements

If you want to run a full node connected to IOST network, your machine must meet the following requirements:

  • CPU: 4 cores or more at least 3.0GHz (8 cores recommended)
  • Memory: 8GB or more (16GB recommended)
  • Disk: 600GB SSD or more (1TB recommended)
  • Network: access to Internet with port tcp: 30000 opened (If you want to enable rpc for node, please open port 30001, 30002)

Prerequisites

Start the node

By default, /data/iserver is going to mount as the data volume, you might change the path to suit your needs. We refer to $PREFIX hereafter.

Using boot script

You can automatically deploy a full node with the following command:

curl https://raw.githubusercontent.com/iost-official/go-iost/master/script/boot.sh | bash
Variablesdefaultdescrption
PREFIX/data/iserveriServer data path
INETmainnetIOST network to connect, either mainnet or testnet
PYTHONpythonpython executable
USR_LOCAL_BIN/usr/local/binprefix of docker-compose executable

You might set environment variable according to the actual conditions.
E.g. curl ... | PYTHON=python3 bash for Ubuntu without python installed.

If you don't install docker, the script will automatically install docker.
You need to make sure you are in the docker group, then re-run the boot script.

This script purges directory $PREFIX and starts a fresh new full node connected to IOST network.
It also generates a keypair for full node in order to prepare for generating blocks.
If you want to be a Servi Node, follow next steps here.

To start, stop or restart the node, you could execute follow command:

## start
docker start iserver

## stop
docker stop iserver

## restart
docker restart iserver

Manually

Data

If you have already run previous version of iServer, make sure the old data has been purged:

rm -rf $PREFIX/storage

Config

Fetch latest config:

## get genesis
curl -fsSL "https://developers.iost.io/docs/assets/mainnet/latest/genesis.tgz" | tar zxC $PREFIX/

## get iserver config
curl -fsSL "https://developers.iost.io/docs/assets/mainnet/latest/iserver.yml" -o $PREFIX/iserver.yml

If your node produces blocks, i.e. be a Servi node, set privkey of your node in section acc in iserver.yml. See also iServer configuration.

Run

Run the command to start the node:

docker pull iostio/iost-node
docker run -d \
    --name iserver \
    -v /data/iserver:/var/lib/iserver \
    -p 30000-30003:30000-30003 \
    --restart unless-stopped \
    iostio/iost-node

Checking the node

The log file is located at $PREFIX/logs/iost.log. However, it is disabled by default. You can enable it, as long as you remember to delete old log files.

You are able to get logs using (docker|docker-compose) logs iserver. An increasing value of confirmed like below means that it is syncing the block data:

...
Info 2019-01-19 08:36:34.249 pob.go:456 Rec block - @4 id:Dy3X54QSkZ..., num:1130, t:1547886994201273330, txs:1, confirmed:1095, et:48ms
Info 2019-01-19 08:36:34.550 pob.go:456 Rec block - @5 id:Dy3X54QSkZ..., num:1131, t:1547886994501284335, txs:1, confirmed:1095, et:49ms
Info 2019-01-19 08:36:34.850 pob.go:456 Rec block - @6 id:Dy3X54QSkZ..., num:1132, t:1547886994801292955, txs:1, confirmed:1095, et:49ms
Info 2019-01-19 08:36:35.150 pob.go:456 Rec block - @7 id:Dy3X54QSkZ..., num:1133, t:1547886995101291970, txs:1, confirmed:1095, et:48ms
Info 2019-01-19 08:36:35.450 pob.go:456 Rec block - @8 id:Dy3X54QSkZ..., num:1134, t:1547886995401281644, txs:1, confirmed:1095, et:48ms
Info 2019-01-19 08:36:35.750 pob.go:456 Rec block - @9 id:Dy3X54QSkZ..., num:1135, t:1547886995701294638, txs:1, confirmed:1095, et:48ms
Info 2019-01-19 08:36:36.022 pob.go:456 Rec block - @0 id:EkRgHNoeeP..., num:1136, t:1547886996001223210, txs:1, confirmed:1105, et:21ms
Info 2019-01-19 08:36:36.324 pob.go:456 Rec block - @1 id:EkRgHNoeeP..., num:1137, t:1547886996301308669, txs:1, confirmed:1105, et:23ms
Info 2019-01-19 08:36:36.624 pob.go:456 Rec block - @2 id:EkRgHNoeeP..., num:1138, t:1547886996601304333, txs:1, confirmed:1105, et:23ms
Info 2019-01-19 08:36:36.921 pob.go:456 Rec block - @3 id:EkRgHNoeeP..., num:1139, t:1547886996901318752, txs:1, confirmed:1105, et:20ms
Info 2019-01-19 08:36:37.224 pob.go:456 Rec block - @4 id:EkRgHNoeeP..., num:1140, t:1547886997201327191, txs:1, confirmed:1105, et:23ms
Info 2019-01-19 08:36:37.521 pob.go:456 Rec block - @5 id:EkRgHNoeeP..., num:1141, t:1547886997501297659, txs:1, confirmed:1105, et:20ms
...

You may also check the state of the node using iwallet tool.

docker exec iserver iwallet state

See also iWallet.

The latest blockchain info is also shown at blockchain explorer.

Upgrade the node

When new version released, it's better to upgrade to the latest version A.S.A.P.

Using upgrade script

You can upgrade the node within one command:

curl https://raw.githubusercontent.com/iost-official/go-iost/master/script/upgrade.sh | bash

You might set variables using environment if encounter problem.

Variablesdefaultdescrption
PREFIX/data/iserveriServer data path
PYTHONpythonpython executable
USR_LOCAL_BIN/usr/local/binprefix of docker-compose executable

E.g. curl ... | PYTHON=python3 bash for Ubuntu without python installed.

This script pulls the latest IOST node image and then restart iServer.

Manually

You may also upgrade the node step-by-step.

Pull image

docker image pull iostio/iost-node:latest

Remove outdated iServer

The iServer container will be recreated, so that everything in container EXECPT data volume will be deleted.

docker stop iserver && docker rm iserver

Start the container

Suppose data volume is located at /data/iserver.

docker run -d --name iserver -v /data/iserver:/var/lib/iserver -p 30000-30003:30000-30003 iostio/iost-node

Seed Node List

The seed node information of the mainnet is as follows:

LocationGRPC-URLHTTP-URLP2P-URL
US18.209.137.246:30002http://18.209.137.246:30001/ip4/18.209.137.246/tcp/30000/ipfs/12D3KooWGoPE333zygBN61vtSjvPfosi78JFSwRRDrLoAKaH1mTP
Korea54.180.196.80:30002http://54.180.196.80:30001/ip4/54.180.196.80/tcp/30000/ipfs/12D3KooWMm2RzyZDPBie89FXceKFSBRg8zzkwAGQmdauj6tmrqcA
UK35.176.24.11:30002http://35.176.24.11:30001/ip4/35.176.24.11/tcp/30000/ipfs/12D3KooWHzHUBq4x4LmXtZH79LCAxVUYgpKXgMgAtyvYQWeHZAAp

For testnet:

LocationGRPC-URLHTTP-URLP2P-URL
US13.52.105.102:30002http://13.52.105.102:30001/ip4/13.52.105.102/tcp/30000/ipfs/12D3KooWQwH8BTC4QMpTxm7u4Bj38ZdaCLSA1uJ4io3o1j8FCqYE

GRPC

If you want to use the GRPC API of IOST network, for example:

## Get the node information
iwallet -s 18.209.137.246:30002 state
iwallet -s ${GRPC-URL} state

HTTP

If you want to use the HTTP API of IOST network, for example:

## Get the block information by block height
curl http://18.209.137.246:30001/getBlockByNumber/3/true
curl ${HTTP-URL}/getBlockByNumber/3/true

P2P

If you want to modify the seed node of the iServer, you could edit the file /data/iserver/iserver.yml, for example:

...
p2p:
  listenaddr: 0.0.0.0:30000
  seednodes:
    - /ip4/18.209.137.246/tcp/30000/ipfs/12D3KooWGoPE333zygBN61vtSjvPfosi78JFSwRRDrLoAKaH1mTP
    - ${P2P-URL}
    - ...

Using Snapshot to Accelerate Synchronization

You might want to download recent blockchain directly instead of syncing from the genesis. Fortunately, we have the snapshot.

Snapshot with pruned history

Download link: storage_prune.tar, about 300M
Checksum: MD5 / SHA1 / SHA256

Download the tar file using your favorite tools (i.e. wget), then do the following steps:

  • make sure iServer is shutdown: docker stop iserver
  • extract the snapshot file: sudo rm -rf $PREFIX/storage && sudo tar xvf storage_prune.tar -C $PREFIX
  • restart iServer: docker start iserver

Then the node is going to continue syncing the blockchain from the certain height.

← Command Line Wallet ToolBecome Servi Node →